Door AccessUbiquiti / UniFi
UniFi Elevator Starter Kit
Ubiquiti Ua Sk Elevator by order in Maputo. Send the equipment model, installation details, photos and quantity to confirm compatibility before purchase.
Overview
- Brand
- Ubiquiti / UniFi
- Category
- Door Access
- Subcategory
- starter kit
- Availability
- By order in Maputo
Main Specifications
- Ambient Operating Humidity
- 5 to 95% noncondensing
- Ambient Operating Temperature
- -10 to 40° C (14 to 104° F)
- Button
- (1) Factory reset
- Buttons
- (1) Factory reset Terminal blocks
- CAN/ULC 60839 11 1 Grade
- Grade assignment: I
- Certifications
- CE, FCC, IC
- Connectivity
- BLE 4.1 NFC
- Digital Input
- (1) Emergency (1) Car position (5-bit) (1) Car status: Up/Down/Stop/Full (1) Door status: Open/Close
- Dimensions
- 40 x 105 x 25 mm (1.6 x 4.1 x 1")
- Document Number, And Issue Date And/or Revision Level
- UA-G2/UA-G2-Black, V02
- ESD/EMP Protection
- Air: ± 8kV, contact: ± 4kV
- Enclosure Material
- Polycarbonate
- Format
- ISO 7810 ID-1
- Handwave Request To Exit
- ✓
- In The Box
- (1) Elevator Hub (1) G2 Reader (2) 2-wire PoE extenders (10) Access Cards
- Indoor And Outdoor Use
- ✓
- LEDs
- White
- Management
- (1) 10/100 MbE
- Management Application
- UniFi Access
- Max. Power Consumption
- 3W (Without PoE output)
- Maximum User Count
- 6,000
- Mobile Unlock
- ✓
- Mount Material
- Aluminum alloy
- Mounting
- In-wall, gang box (Included) Junction box (Optional)
- Mounting Material
- Polycarbonate
- NDAA Compliant
- ✓
- NFC Card & Keyfob Access
- ✓
- NFC Frequency
- 13.56 MHz
- NFC Read Range
- < 30 mm (1.18'')
- NFC Technology
- ISO/IEC 14443 Type A MIFARE DESFire UniFi Access Proprietary Security Protocol
- Networking Interface
- (1) 10/100 MbE (1) Homeplug AV
- Outputs
- (18) Relays Rating 30V DC/2A
- PoE Cabling Requirements
- Cat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm² ) for patch
- PoE Interface
- PoE input: (1) PoE++, 50V DC, Max. 1.2A PoE output: (1) PoE+, 48V DC, 0.72A
- Power Method
- PoE++
- Sensors
- Proximity sensor
- Software Information
- The software version can be checked at https://unifi.ui.com
- Speaker
- (1) Yes, 0.7W
- Supported Voltage Range
- 48V DC
- UL 294 Level
- Destructive attack: Level I Line security: Level I Endurance: Level I Standby power: Level I
- UL 294 Statement
- Compliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
- Weatherproofing
- IP55
- Weight
- PoE in: 77 g (2.7 oz) PoE out: 79 g (2.8 oz)
Compatibility
- Use 1
- Ubiquiti / UniFi